Red Runner 27T Deluxe Firewood Processor
Red Runner 27T Deluxe Firewood Processor
The most complete and autonomous firewood processor!
- Can take logs up to 16-inch in diameter, able to produce 3 face cords/hour
- High quality Torflex suspension, wheel fenders with LED signals, 10" wheels with high speed tires
- Powered by a 13HP Honda / 14HP Vanguard gas engine (at choice)
- Equipped with an 18 inch OREGON chainsaw with automatic blade lubrication system
- High quality conveyor belts with 30 degrees left/right swiveling exit conveyor
-
*FOR U.S. CUSTOMERS* In accordance with American laws on the regulation of road vehicles, you cannot drive this equipment on streets or highways without securing it to a compliant trailer. Off-road use only.
Specifications
engine
- Honda GX390 Premium (13 HP) / Briggs & Stratton Vanguard (14 HP)
- Electric start
- 3-years warranty
saw section
- 18-inch OREGON Professional saw bar and chain (16-inch cutting capacity)
- Hydraulically actionned saw
- Automatic chain lubrication system
- Openable saw cover for easy access and maintenance of the saw and chain
- Premium hydraulic saw motor of superior quality allowing a powerful cutting speed at 6000 rpm
- Saw cover safety switch. If the cover is open, the saw stops immediately
- Includes an easy-to-read ruler to measure the desired lengths of cuts from the last log, possible to cut logs between 10 and 22 inches
splitting Section
- 4-way splitting blade included (6-way available in option)
- Splitting power of 27 tons nominal
- Quick return of the splitter's cylinder
- Adjustable oil flow system
- Oversized screen oil filter, easy to clean and environmentally friendly, allowing high precision filtration
- Filter indicator, it will tell you when it's time to clean it
- Larger cap for the hydraulic oil tank, screwed, ventilated and better placed to facilitate filling
- Easy and very safe splitting clutch. It is as easy to initiate as it is to stop. In addition, it stops automatically when the saw cover is opened
Infeed conveyor section
- Maximum length of 10 feet long logs at the input, can be increased to 16 feet with the addition of a feeding table in option
- Premium quality full length entrance conveyor belt
- Allows you to advance your logs up to the saw, without any effort
Exit conveyor section
- 30 degrees swiveling conveyor
- Conveyor length of 10.5 feet, foldable for easy transportation and storage
- 10-inch wide premium quality conveyor belt with steel covered conveyor cleats
- Conveyor hydraulic control valve for greater safety and easier winter start-up
- 1200 lb winch for conveyor height adjustment
- Heavy-Duty winch rope
Towing equipment
(Not permitted on U.S. roads)
- 2 inch towing drawbar
- 3500-lb safety chains
- High quality TorFlex suspension
- High-speed tires on alloy wheels
- Aluminum fenders
SPECIALLY FOR YOU
- Reinforced hydraulic system to prevent overheating of hydraulic oil
- 1 adjustable jack with a swivel wheel to increase the stability and movement of your firewood processor
- Hydraulic power output double valve
- Emergency stop button
- Hour meter to easily follow your maintenance schedule
- Toolbox
Gino Lavoie –
Un vidéo d’opérations serait bien et de mentionner combiens de cordes a l’heure ont peut produire a vitesse normale avec le processeur redrunner deluxe. Toutefois, nous avons plusieurs photos très claires de la machine, ce qui est super.
Steve –
Just so we are talking the same language – is a “string” a bush cord?
How many bush cord does this pump out on average per hour?
Yves Bond –
Processeur Red Runner de Luxe très facile à opérer. Ce qui est remarquable, c’est le service après vente qui est impeccable. J’ai eu à demander des informations à 2 reprises, et j’ai immédiatement eu mes réponses.
Jeffrey Sawyer –
Nice little processor ! Traded my standard for deluxe and im very happy with it. The honda engine and all other options are really worth it
Claude B –
Beau bon pas cher ! Parfait pour petit bois et le convoyeur pivotant tres pratique
Norbert Bourgoun –
Can you leave it outdoor in the rain
Paul –
It needed some minor improvements at first but overall very satisfied with my Deluxe
Ravelli –
Bonjour j aimerai savoir les délais de livraison en France et le prix du transport merci
Andrew –
the machine i wish i had 20 years ago
Steven Dickinson –
Does anyone know if that does a two full cord of wood or is it a face cord per hour
Vallee Forestry Equipment –
Hi Steven, we are talking about face cords (4’x8’x16”).
John –
Tres bonne machine très facile à opéré avec la table à billot fait environ 3 cordes à l hr la seul chose à surveiller avent le démarrage de la machine faire le tour des chose et des bolts voir si tous est bien serré sinon tres satisfait
Mike McCaffrey –
Intrested
William milburn –
Do not know rating yet I am looking for a dealer or how to get one of these machines
Vallee Forestry Equipment –
I invite you to consult the ”find a dealer” section of our website to find the nearest dealer. You can also contact us at 1 (800) 577-2722 for further assistance.
paulo –
bonjour jaimerais inf pour processeur a bois red runner deluxe 27 tonne avec les fourche pour lever les billot le prix avec les taxe je vien de Gatineau je fait 200 corde par annee merci
Vallee Forestry Equipment –
Bonjour Paulo, veuillez nous appeler au 1 (800) 577-2722 ou communiquez avec votre détaillant local pour une soumission.
Shane Smith –
Good evening
Hi this is Shane . I would like to order a 27T Pro
with all the accessories. Who much does it cost and how long does it take when I order one ?
Thanks
Shane Smith
Vallee Forestry Equipment –
Hi Shane, please call us at 1 (800) 577-2722 or contact your local dealer for a quote.
Christopher keats –
what’s the overall weight of the unit
Donald Verna –
I purchased the unit at the end of April from Lumberjack Shack in MI. The dealer has been very good. About three weeks ago I had a part fail when a split jammed and I have been waiting semi-patiently. Some story about customs issues. It is very frustrating. I really like the unit but if the company cannot get its act together with respect to supplying parts to the US, I would caution American buyers about making the investment. Saving money is nice but a machine that is down for over three weeks is not acceptable. Today, the dealer told me they hope to have the part sometime next month. IMO replacement parts, that a customer will install, should be shipped to the customer ASAP. Maybe charge the customer for shipping. I would rate the machine a solid 4, the dealer a 5 and Vallee a 3. I will update later if my opinion changes.
Donald Verna –
The company came through and got the replacement part to me! Since the part arrived I have been getting more time on the machine. It has operated very well and when my friend from church came over last week to process wood he said “WOW!!” We processed 5 face cords in 3 hours with some junk wood. When we had a bunch of 6-10” logs, we did 1.5 face cords in less than 40 minutes.
One issue is splitting force. I need to put a pressure gauge on to check it out. It struggles with 12-14” logs. Not a deal killer but something to watch for unless you want to deal with a jam that is not easy to clear.
I would definitely buy it again but would upgrade to the new model with hydraulic log hold down. Again, my dealer, Lumberjack Shack in Michigan has been excellent.
I have used a Dyna processor in tie past. It a a commercial unit but costs four times as much. I could not justify investing over $50k for my needs. I will be running a small side business and this unit is a good fit. If you intend to make a living selling firewood, my recommendation is to look at the commercial machines.
Vallee Forestry Equipment –
Hi Donald, thank you for taking the time to share your 27T Deluxe experience with us. Although there was a slight delay in delivering your replacement part, we are delighted to learn that you are now enjoying the performance of your processor.
Your feedback regarding the splitting force issue with larger logs is important to us, and we will definitely use it to drive future improvements. Additionally, your commendation of Lumberjack Shack in Michigan, our trusted dealer, is greatly appreciated.
Your choice to invest in our equipment is highly valued, and we want to express our best wishes for your ongoing success in your firewood side business!