Discover efficiency at a low price with our 27T Standard firewood processor. An economical choice that maximizes your investment without compromising on quality.
Can take logs up to 16-inch in diameter, able to produce 2 face cords/hour
Equipped with a STIHL 18-inch chainsaw
Powered by a 14HP Kohler gas engine
United States: In accordance with U.S. motor vehicle regulations, please note that this equipment may not be used on roads or highways without being properly loaded onto a compliant trailer. Off-road use only.
Air cooled 4 stroke with inclined single cylinder gasoline engine
Quad-Clean filter for extreme conditions
Hot air recycling system for winter conditions
Saw section
Original 18-inch STIHL blade (16-inch cutting capacity)
Original 325 STIHL chain
Manual saw lowering system
Continuous chain lubrication system with visible indicator and large capacity tank. A simple valve to open or close, efficient and reliable
Superior quality hydraulic saw motor allowing a powerful cutting speed of 6000 rpm
Openable saw cover, allowing easy access to the splitter
Saw cover safety switch. If the cover is open, the saw stops immediately
Includes an easy-to-read ruler to measure the desired lengths of cuts for the last log, possible to cut logs between 10 and 22 inches long
Splitting section
4-way splitting blade included (6-way available in option)
Splitting power of 27 tons nominal
Quick return of the splitter's cylinder
Adjustable oil flow system
Oversized screen oil filter, easy to clean and environmentally friendly, allowing high precision filtration
Filter indicator, it will tell you when it's time to clean it
Easy and very safe splitter activator. It is as easy to initiate as it is to stop. In addition, it stops automatically when the saw cover is opened
infeed table section
Maximum length of 10 feet long logs at the input, can be increased to 16 feet with the addition of a feeding table in option
exit conveyor section
Conveyor length of 10.5 feet, foldable for easy transportation and storage
10-inch wide conveyor belt
1200 lb winch for conveyor height adjustment
Heavy-Duty winch rope
Towing section
2-inch towing drawbar
3500-lb safety chains
Specially for you
Reinforced hydraulic system to prevent the overheating of the hydraulic oil
1 adjustable jack with a swivel wheel to increase the stability and movement of your firewood processor
Hydraulic power output double valve
Emergency stop button
Hour meter to easily follow your maintenance schedule
Toolbox
11 reviews for 27T Standard
Rated 4 out of 5
Greg –
Is their a larger horse power motor available?
Is there other wedges available., what size wedges are availible.
Where can I c one operate.?
Rated 4 out of 5
Ed hughes –
Wanting to try this unit out like to be a dealer for northern nova scotia ,
Rated 4 out of 5
M D –
Impressive! I just picked up the standard 27 firewood processor and couldn’t wait to try it out. So far I have only put through about 1/2 a cord and it works very well. Like any new tool or machine there’s always a bit of a time to get into the rhythm. But once you get that figured out, it processes a lot of wood quickly. I only ran the unit at a fast idle which was fast enough for me to learn. The unit likes logs of at least 6″ or larger. Smaller logs work but not as smoothly or efficient as larger ones. So far very impressed and the only negative for me is that the log clamp requires a moderate amount of force and thus ones arm gets fatigued over time. (However my office job may be a factor). The unit is built quite well where it counts and with care should last many years. Don’t forget to open chain oil valve AND set needle valve flow control and turn off after shutting down. I like that the 4 way splitter can be adjusted very quickly if doing various sized logs. If working alone I think you will definitely want a log cradle to load up multiple logs for more efficiency. I hope this helps someone out there.
Rated 5 out of 5
Peter M –
I was skeptical at first because of the low price compared to other brands but after 50 cords done so far I can tell you that this machine is really great!
Rated 5 out of 5
Gerald –
great processor
Rated 5 out of 5
Carl Nieberding –
I am very interested in purchasing a Canadian made firewood processor example 27T but you have no representation in Alberta. Can you direct me to your closest dealer. I have 3.5 acres all treed and looking for a better way to manage my fallen timber.
Thanks
Carl
Rated 5 out of 5
Marvin French –
Awesome
Rated 5 out of 5
Steve –
I purchased one 3 years ago with the hydraulic feed table, no issues what so ever. Very well made, good investment saves time and my body. I highly recommend one of these models.
Rated 4 out of 5
FERME MARCEL-MARIE PICARD ET FILS INC –
Très intéressant
Rated 5 out of 5
ferme maurida ,,,, richard vincent –
j,ai acheter un processeur red runner usager j,avais un probleme avec le moteur hydrolique de scie, ils me l,ont echanger pour le nouveau model sans frais et depuis plus de problemes maintenant je ne travail plus je m,amuse. merci vallee equipement de st denis de brompton
Rated 5 out of 5
Scott Rubie –
I have the 27 standard. bought it three years ago and I like it. I process about 25 cord of wood a year. I’ve had the belt break a few times but it can be repaired. discovered I was keeping it too tight. with it loosened of I’ve had no problems in the last year of operation. The adjuster for the splitter wedge is crap. keeps bend and won’t hold the wedge up in place. I’ve rigged a block under it to keep it in place. other than that I’m quite happy with it. I split a lot of wood with it. keep the log dimension down to 12″. 16″ is max and you’ll find yourself wrestling with it. happy to show you my machine and chat about it. I’m near Renfrew
Greg –
Is their a larger horse power motor available?
Is there other wedges available., what size wedges are availible.
Where can I c one operate.?
Ed hughes –
Wanting to try this unit out like to be a dealer for northern nova scotia ,
M D –
Impressive! I just picked up the standard 27 firewood processor and couldn’t wait to try it out. So far I have only put through about 1/2 a cord and it works very well. Like any new tool or machine there’s always a bit of a time to get into the rhythm. But once you get that figured out, it processes a lot of wood quickly. I only ran the unit at a fast idle which was fast enough for me to learn. The unit likes logs of at least 6″ or larger. Smaller logs work but not as smoothly or efficient as larger ones. So far very impressed and the only negative for me is that the log clamp requires a moderate amount of force and thus ones arm gets fatigued over time. (However my office job may be a factor). The unit is built quite well where it counts and with care should last many years. Don’t forget to open chain oil valve AND set needle valve flow control and turn off after shutting down. I like that the 4 way splitter can be adjusted very quickly if doing various sized logs. If working alone I think you will definitely want a log cradle to load up multiple logs for more efficiency. I hope this helps someone out there.
Peter M –
I was skeptical at first because of the low price compared to other brands but after 50 cords done so far I can tell you that this machine is really great!
Gerald –
great processor
Carl Nieberding –
I am very interested in purchasing a Canadian made firewood processor example 27T but you have no representation in Alberta. Can you direct me to your closest dealer. I have 3.5 acres all treed and looking for a better way to manage my fallen timber.
Thanks
Carl
Marvin French –
Awesome
Steve –
I purchased one 3 years ago with the hydraulic feed table, no issues what so ever. Very well made, good investment saves time and my body. I highly recommend one of these models.
FERME MARCEL-MARIE PICARD ET FILS INC –
Très intéressant
ferme maurida ,,,, richard vincent –
j,ai acheter un processeur red runner usager j,avais un probleme avec le moteur hydrolique de scie, ils me l,ont echanger pour le nouveau model sans frais et depuis plus de problemes maintenant je ne travail plus je m,amuse. merci vallee equipement de st denis de brompton
Scott Rubie –
I have the 27 standard. bought it three years ago and I like it. I process about 25 cord of wood a year. I’ve had the belt break a few times but it can be repaired. discovered I was keeping it too tight. with it loosened of I’ve had no problems in the last year of operation. The adjuster for the splitter wedge is crap. keeps bend and won’t hold the wedge up in place. I’ve rigged a block under it to keep it in place. other than that I’m quite happy with it. I split a lot of wood with it. keep the log dimension down to 12″. 16″ is max and you’ll find yourself wrestling with it. happy to show you my machine and chat about it. I’m near Renfrew